Saturday , December 7 2024
Home / Basic Configuration / from Huawei CLI – reset saved-configuration

from Huawei CLI – reset saved-configuration

reset saved-configuration

If you need to reconfigure a Huawei device and do not want to delete its configuration line by line, it is the fastest way to restore the device to the default configuration. Reset saved-configuration command does not delete the existing configuration file in storage device. It is required to restart the device to activate changes. Before reboot, the device compares the configuration file to be loaded at the next startup and existing file to be deleted. Finally the device:

  • loads the default configuration if both files are the same
  • deletes the configuration file in use if they are different
  • displays a message indicating that the configuration file does not exist if the configuration file to be deleted does not exist
<labnario> reset saved-configuration
The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]: y

Which configuration file is set as the “next startup saved-configuration file” you can check by the following command:

<labnario> display startup
MainBoard:
  Configured startup system software:        cfcard:/v600r002c03spc100.cc
  Startup system software:                   cfcard:/v600r002c03spc100.cc
  Next startup system software:              cfcard:/v600r002c03spc100.cc
  Startup saved-configuration file:          cfcard:/labnario.cfg
  Next startup saved-configuration file:     cfcard:/labnario.cfg
  Startup paf file:                          cfcard:/paf.txt
  Next startup paf file:                     cfcard:/paf.txt
  Startup license file:                      cfcard:/license.txt
  Next startup license file:                 cfcard:/license.txt
  Startup patch package:                     cfcard:/patch.pat
  Next startup patch package:                cfcard:/patch.pat
SlaveBoard:
  Configured startup system software:        cfcard:/v600r002c03spc100.cc
  Startup system software:                   cfcard:/v600r002c03spc100.cc
  Next startup system software:              cfcard:/v600r002c03spc100.cc
  Startup saved-configuration file:          cfcard:/labnario.cfg
  Next startup saved-configuration file:     cfcard:/labnario.cfg
  Startup paf file:                          cfcard:/paf.txt
  Next startup paf file:                     cfcard:/paf.txt
  Startup license file:                      cfcard:/license.txt
  Next startup license file:                 cfcard:/license.txt
  Startup patch package:                     cfcard:/patch.pat
  Next startup patch package:                cfcard:/patch.pat

One comment

  1. Hello Brother if you can please instruct me in password recovery of huawei NE40e v600

Leave a Reply

Your email address will not be published. Required fields are marked *