Sunday , May 16 2021
Home / Tag Archives: Huawei S3700

Tag Archives: Huawei S3700

how to check the default configuration of switch’s interface

When taking into consideration that default settings are invisible in a configuration file, it is a good information that Huawei’s S3700/S5700 switches have such possibility to display default settings for ethernet interfaces. The ‘display this include-default’ command displays the effective configurations in the current view, including the unchanged default configurations.

[labnario-Ethernet0/0/1]display this include-default 
#
interface Ethernet0/0/1
 portswitch
 undo shutdown
 enable snmp trap updown
 undo set flow-stat interval
 undo qinq vlan-translation enable
 undo mac-address learning disable
 port priority 0
 port link-type hybrid
 port hybrid pvid vlan 1
 port hybrid untagged vlan 1
 qinq protocol 8100
 undo loopback-detect enable
 stp enable
 undo stp config-digest-snoop
 undo stp no-agreement-check
 undo stp root-protection
 undo stp loop-protection
 stp transmit-limit 147
 stp point-to-point auto
 stp compliance auto

Read More »

how to configure multiple interfaces at the same time

This is an useful feature, specially if we want to configure Huawei’s switch, where there are lots of physical interfaces. Very often, some of interfaces have the same configuration. Instead of configure the interfaces one by one it is easier to configure multiple interfaces at the same time. It improves the efficiency.

Let’s assume that you want to add 5 GE interfaces to VLAN 100:

[labnario]port-group labnario
[labnario-port-group-labnario]group-member GigabitEthernet 0/0/1 to GigabitEthernet 0/0/5
[labnario-port-group-labnario]port link-type access
[labnario-port-group-labnario]port default vlan 100

[labnario]dis cur | beg port-group
port-group labnario
 group-member GigabitEthernet0/0/1
 group-member GigabitEthernet0/0/2
 group-member GigabitEthernet0/0/3
 group-member GigabitEthernet0/0/4
 group-member GigabitEthernet0/0/5

Read More »